PrimeLab 1.0 MULTITEST User Manual Download Page 103

Page: 103 / 353

Note(s)

-> (*) Special accessories required / not included as standard equipment!

-> The sample water needs to have a yelowish to yellowish-brown coloration to

be tested with this method which is based on the "Hazan Standard",

developed by A. Hazen (EN ISO 7887:1994).

-> 1 Pt-Co equals 1 mg/L platinum (as chloroplatinate ion)

-> Analyse as soon as possible after taking the sample. Use clean glass or

plastic containers for transport and avoid air contact of the sample water. Do

not stir sample water. Store sample for max. 24 hours at a dark place at 4°C.

-> Test to be performed with sample water having room temperature.

-> The estimated detection limit is 15 units Pt-Co.

-> Use the same vial for ZERO and TEST.

Continued...

Name on device: 107-Colour

(107)

Colour

0 - 500 mg/l

(Pt-Co)

Summary of Contents for 1.0 MULTITEST


































































































































































































































































































































































Search results

Summary of Contents for 1.0 MULTITEST

Reviews:

Related manuals for 1.0 MULTITEST

Brands by name

Popular brands

PrimeLab 1.0 MULTITEST, User Manual

Search results

Summary of Contents for 1.0 MULTITEST

Reviews:

Related manuals for 1.0 MULTITEST

Brands by name

Popular brands