Pressure Systems, Inc. Model 9116 User’s Manual
Page 56
www.PressureSystems.com
Command ‘c’ — Sub-command Index 04:
Return Stream Information
This sub-command returns current stream configuration information in its response. Its format
is:
Command
“
c 04
st
”
‘c’ is the
command
letter
‘04’ is the sub-command index (‘
ii
’) for configuration
‘
st
’ is the stream identifier character (1, 2, or 3
only
)
NOTE: all parameters are separated by a
space
character
.
Response
“
st [[[[p]p]p]p sync per f num pro remport ipaddr
bbbb
”
‘st’ is the
stream identifier
digit (1,2, or 3)
‘
pppp
’ is a hex
position
field (channel selection bit map)
‘
sync
’ is
sync type
character
(0 or 1)
‘
per
’ is the
period
(# trigger periods or delay timer period)
‘
f
’ is the
format
of the data delivered in stream
‘
num
’ is the
number
of packets delivered
in the stream
‘
pro’
identifies the protocol used for stream delivery (1=UDP/IP, 0=TCP/IP.
This protocol identifier pertains to stream delivery
only
.
‘remport’
identifies the remote port number to which each stream delivery
is directed in the host. A value of -1 indicates that stream delivery is
directed to the same port number the host is using to send commands to
the module.
‘ipaddr’
identifies the IP address of the host to which the stream delivery is
directed.
‘bbbb’ another position field (data options bit map) as specified by the “
05
”
sub-command.
NOTE: All datum fields separated by a
space
character.
Autonomous
Packet
none generated
Description:
This sub-command returns current configuration information for a particular
stream. Returned values are defined the same as the sub-command parameters
of
separate
commands
Configure a Host Delivery Stream
(“
00
,”
Select Protocol
,
“
06
,” and
Select Data in a Stream,
“
05
.”). Note that the ‘
num
’ field represents the
number of packets returned so far (= last sequence number returned, or =0 if
stream not yet started.
