Pressure Systems NetScanner 9116, User Manual

Page: 64 / 143

Pressure Systems, Inc. Model 9116 User’s Manual
Page 55 www.PressureSystems.com
Command ‘c’— Sub-command Index 03: Clear Stream(s)
This sub-command is used to “undefine” any previously configured host stream in a module,
one at a time, or all together. The sub-command’s format is:
Command
“ c 03 st ”
‘c’ is the
command letter
‘03’ is the sub-command index (‘ ii ’) for configuration
‘ st ’ is the stream identifier character (1, 2, or 3 or 0= all streams )
NOTE: all parameters are separated by a
space character .
Response
“ A ”
‘A’ is the acknowledge letter
Autonomous
Packet
none generated
Description: This sub-command clears (un-defines) the particular specified host stream ( st =1-
3), or un-defines “all configured” host streams with a single command ( st =0).
Once cleared, a stream must be reconfigured before it can be started.
Example:
●
Stop all the streams configured previously. Then clear (un-define) only stream 3.
Finally, resume the remaining defined streams 1 and 2:
“ c 02 0 ”
“ c 03 3 ”
“ c 01 0 ”
Read response:
“A”
“A”
“A”