Pressure Systems, Inc. Model 9116 User’s Manual
Page 9
www.PressureSystems.com
2.3.3
Mounting and Module Dimensions
See the
Model 9116
Data Sheet for exact dimensions of the module. A detailed mechanical
drawing is also included in
Appendix E.
2.3.4
Network Communications Hookup
Every
NetScanner
™
System
Intelligent Pressure Scanner contains a Host Port, allowing it to be
interconnected in a network with other modules and a host computer.
Model 9116
has an
Ethernet Host Port using TCP/IP and UDP/IP transmission protocols.
2.3.4.1
Ethernet Host Port Hookup
The Ethernet Host port of every
Model 9116
Intelligent Pressure Scanner module, and its host
computer, may be interconnected in a “star” network via a standard 10BaseT or 100BaseT, half
or full duplex hub or switch. These standard devices will have their own power requirements.
Hubs will treat the host computer connection and all
NetScanner
™
System
module connections
alike. Switches may provide, or negotiate different speeds and/or different handshaking on its
various ports. The
Model 9116
will auto-negotiate through the hub or with the switch, for a half
or full duplex connection at 10BaseT or 100BaseT speeds, establishing the best connection
available. Ethernet communications pin assignments for the
Model 9116
electrical connector
are shown in
Figure 2.2.
See
Figure 2.3
for typical network topology.
Figure 2.2
Ethernet Host Port Connector Pins
