Polestar 2 2020, Manual

Page: 538 / 568

Related information
• Using the rain sensor (p. 155)
• Using windscreen and headlamp washers
(p. 157)
• Using the rain sensor's memory function
(p. 156)
• Filling washer fluid (p. 538)
• Replacing windscreen wiper blades (p. 536)
• Using windscreen wipers (p. 154)
• Wiper blades and washer fluid (p. 154)
IMPORTANT
• Before placing the wiper blades in the
service position, make sure that they
are not frozen down.
• If the wiper arms in service position
have been folded up from the wind-
screen, they must be folded back down
onto the windscreen before the activa-
tion of wiping, washing or the rain sen-
sor, as well as before driving. This is to
avoid damaging the paint on the bon-
net.
Filling washer fluid
Washer fluid is used for cleaning the headlamps
and windscreen. Washer fluid with antifreeze
must be used when the temperature is under
the freezing point.
Washer fluid is filled into the reservoir with the
blue cap. The reservoir is used for both wind-
screen washer and headlamp washers.
Prescribed grade: Washer fluid recommended
by Polestar – with frost protection during cold
weather and for temperatures below freezing
point.
Volume:
• Cars with headlamp cleaning: 5.5 litres (5.8
qts).
• Cars without headlamp cleaning: 3.5 litres (3.7
qts).
Related information
• Using the rain sensor (p. 155)
• Using windscreen and headlamp washers
(p. 157)
• Using the rain sensor's memory function
(p. 156)
• Setting the wiper blades to service position
(p. 537)
538 Maintenance and service