Polestar 2 2020, Manual

Page: 250 / 568

Display mode for road
sign information
The Road Sign Information function (RSI
47
)
shows road signs in different ways depending
on the sign and the situation.
Example
48
of detected speed information.
When the function detects a road sign with an
imposed speed limit the driver display shows
the sign as a symbol.
Since speed-related information is obtained
from map data, the driver display can show or
change information on the speed limit without
having passed a speed-related sign.
An additional sign, such as "no
overtaking", may be shown
together with the speed limit
symbol.
If the driver enters a road
marked with this no-entry sign
on each side, or on one side
with confirmation from map
data, the symbol for this sign
flashes on and off in the driver
display to warn the driver. The
driver can also be given an acoustic warning
when driving towards a no-entry road if the
function for acoustic warning for road signs is
activated.
49
Speed limit or end of motorway
When the function detects an "indirect speed
limit sign" stating the end of the current speed
limit – e.g. at the end of a motorway – a symbol
may be shown with the corresponding road sign
in the driver display.
Normal speed limit signs are displayed in nor-
mal cases even if an indirect speed limit sign has
been passed – indirect speed limit signs are only
shown if map data has no information on the
speed limit for the section of road in question.
Example of indirect speed limit sign:
End of all restrictions.
End of motorway.
The driver display symbol extinguishes after
10-30 seconds and remains so until the next
speed related sign is passed.
Changed speed limit
When passing a direct speed limit sign when a
speed limit changes a symbol with the corres-
47 Road Sign Information
48 Road signs are market-dependent - the illustrations in
these instructions only show examples.
49 Applies to certain markets.
250 Driver support