Polestar 2 2020, Manual

Page: 353 / 568

WARNING
• • The charging cable has a built-in cir-
cuit breaker. Charging must only
take place with grounded and
approved sockets.
• Children should be supervised when
in the vicinity of the charging cable
when it is plugged in.
• High voltage in the charging cable.
Contact with high voltage can cause
death or serious personal injury.
• Do not use the charging cable if it is
damaged in any way. Any charging
cable that is damaged or not work-
ing may only be repaired by a work-
shop – contact Polestar Support for
more information.
• Always position the charging cable
so that it will not be driven over,
stepped on, tripped over or dam-
aged in some other way, or cause
personal injury.
• Disconnect the charger from the
wall outlet before cleaning it.
• Never connect the charging cable to
an extension cord or a multiple plug
socket.
• Do not use one or more adapters
between the charging cable and the
electrical socket.
• Do not use an external timer
between the charging cable and
electrical socket.
Also, refer to the manufacturer's
instructions for using the charging
cable and its components.
WARNING
• The charging cable and its associated
parts must not be swamped or
immersed in water.
IMPORTANT
• The charging cable is used to charge
the car's high voltage battery. The
charging cable has been designed to
meet Polestar's safety standard. Use a
Polestar-recommended charging
cable that guarantees its function and
safety. Polestar is not responsible for
the safety of, or any damage caused
by, a charging cable that is not recom-
mended by Polestar.
• Multiple plugs, extension cables, over-
voltage protection or similar devices
must not be used together with the
charging cable since this may involve a
risk of fire, electric shocks, etc.
An adapter between the 230 V socket
(alternating current) and the charging
cable may only be used if the adapter is
approved in accordance with IEC 61851
and IEC 62196.
• Never unplug the charging cable from
the 230 V socket (alternating current)
while charging is in progress - there is
then a risk of damaging the 230 V
socket. Always stop charging first
before unplugging the charging cable
from the car's charging input socket
and then from the 230 V socket.
>>
Electric operation and charging 353