Polestar 2 2020, Manual

Page: 130 / 568

Adapting the
headlamp pattern from
the headlamps
The headline patent can be adjusted when
switching from right-hand to left-hand traffic,
and vice versa. This function adapts the beam
from the headlamps so that there is less risk of
oncoming traffic being dazzled.
1. Tap on in the centre display.
2. Then tap on More .
3. Select Exterior Lights and activate/deactivate
Temporary Left Hand Traffic / Temporary
Right Hand Traffic .
Related information
• Adjusting light functions via the centre dis-
play (p. 129)
• Active bending lights (p. 136)
• Car function view in the centre display (p. 112)
Position lamps
Position lamps can be used so that other road
users can see the car if it stops or is parked. The
position lamp is switched on with the rotating
ring on the stalk switch.
Stalk switch rotating ring in position lamps posi-
tion.
Turn the rotating ring to the position - the
front and rear position lamps are switched on
(number plate lighting is switched on at the
same time).
If the car is in drive mode, the daytime running
lights are switched on instead of the front posi-
tion lamps.
If the car is stationary but running, the rotating
ring can be moved to the position lamp
position from another position to switch on only
the position lamps instead of other lighting.
When driving for more than 30 seconds at max.
10 km/h (approx. 6 mph), or if the speed exceeds
10 km/h (approx. 6 mph), the daytime running
lights are switched on. The driver should then
turn to a position other than
.
If the tailgate is opened when it is dark outside,
the rear position lamps are switched on (if not
already switched on) to warn road users
approaching from behind. The position lamps
130 Lighting