Polestar 2 2020, Manual

Page: 461 / 568

Saving new reference
value for tyre pressure
monitoring
In order for the system for tyre pressure moni-
toring
164
to work correctly, a reference value for
the tyre pressure must be saved. This must take
place every time the tyres are changed or the
tyre pressure is changed so that the system can
warn about low pressure correctly.
For example, when driving with a heavy load or
at high speed above 160 km/h (100 mph), the tyre
pressure should be adjusted in accordance with
Polestar's recommended tyre pressure values.
The system is then reset by saving a new tyre
pressure.
Perform the following procedure to store a new
tyre pressure as a reference value in the system:
1. Switch off the car.
2. Inflate the tyres to the correct pressure, see
the decal on the door pillar on the driver's side
showing the recommended pressure for fac-
tory fitted tyres.
3. Start the car.
4. Tap on in the centre display.
5. Press More .
6. Press Car status .
7. Press Store pressure .
A message is shown if storing fails.
Related information
• Recommended tyre pressure (p. 458)
• Adjusting tyre pressure (p. 457)
• See tyre pressure status in the centre display
(p. 462)
• Rectifying a warning for low tyre pressure
(p. 463)
• System for tyre pressure monitoring (p. 459)
• Starting the car (p. 372)
164 Indirect Tyre Pressure Monitoring System (ITPMS)
Wheels and tyres 461