Polestar 2 2020, Manual

Page: 327 / 568

WARNING
The sensor fields
on the 360° sym-
bol only show the
direction of an
obstacle's loca-
tion. They do not
show the dis-
tance to the obstacle.
Activate park assist
camera
The park assist cameras (PAC
127
) are activated
automatically when reverse gear is engaged or
manually with the centre display's function but-
ton.
Camera view when reversing
When reverse gear is engaged, the screen
shows the 360° view if it or any of the side views
was the last used camera view, otherwise the
rear view is shown.
Camera view for manual camera activation
Activate the parking camera
with this button in the upper
part of the centre display.
The screen then initially shows
the last used camera view.
However, after each engine
start, the previously shown side view is replaced
by the 360° view and the previously shown
zoomed rear view is replaced by the rear view.
• Button indication on – the function is acti-
vated.
• Extinguished button indication – the function
is deactivated.
Automatic deactivation of camera
The front view extinguishes at 25 km/h (16 mph)
to avoid distracting the driver – it reactivates
automatically if the speed drops to 22 km/h
(14 mph) within 1 minute, on the condition that
the speed has not exceeded 50 km/h (31 mph).
Other camera views are extinguished at 15 km/h
(9 mph) and are not reactivated.
127 Park Assist Camera
>>
Driver support 327