Polestar 2 2020, Manual

Page: 537 / 568

The wiper blades are different lengths
Related information
• Using the rain sensor (p. 155)
• Using windscreen and headlamp washers
(p. 157)
• Using the rain sensor's memory function
(p. 156)
• Filling washer fluid (p. 538)
• Setting the wiper blades to service position
(p. 537)
• Using windscreen wipers (p. 154)
• Wiper blades and washer fluid (p. 154)
NOTE
When replacing the wiper blades, note
that they have different lengths. The
blade on the driver's side is longer than
on the passenger side.
Setting the wiper
blades to service
position
In some situations, the windscreen's wiper
blades must be set in service position (vertical
position), e.g. when they shall be replaced.
Wiper blades in service position.
In order to change, clean or lift the wiper blades
(e.g. for scraping off ice from the windscreen)
they must be in service position.
Activating/deactivating service mode
Service mode can be activated/deactivated
when the car is stationary and the windscreen
wipers are not on. Service mode is activated/
deactivated via the centre display:
1. Tap on in the centre display.
2. Then tap on More .
3. Select Mirrors & Wipers and activate/deacti-
vate service mode for the wiper blades.
The wiper blades also exit the service position if:
• Windscreen wiping is activated.
• Windscreen washing is activated.
• The rain sensor is activated.
• The car is driven away.
>>
Maintenance and service 537