Polaris 850 PRO-RMK 155 2.6" QD 2021, Manual

Page: 708 / 747

10.84
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
SWITCHES
IGNITION SWITCH
Test the ignition switch using a digital multimeter.
Reference the continuity table and test each circuit as
the key is turned. Replace ignition switch if testing
indicates an open connection.
PIN CONTINUITY
SWITCH POSITION CONTINUITY BETWEEN
Off Pins E and F
On
Pins C and D
Pins A and F
Start
Pins A and B
Pins C and D
NOTICE
The keys used with the 3 position key switch can be
duplicated only by obtaining a key blank and having it
cut by mating it with an existing key.
If both of the original keys are lost, the ignition switch
assembly must be replaced.
OIL LEVEL SENDER
To test the oil level sender, position the sender as it
would be in the oil tank. Allow the float to drop in the
direction it would if the oil tank were empty. Continuity
should be present when using a multimeter to test the
sender with the float in the “empty” position.
No continuity should be present when the float is moved
away from the “empty” position.
AUXILIARY STOP SWITCH
The auxiliary stop switch is a hard stop switch and will
shut off the engine when pushed down.
PIN CONTINUITY
SWITCH
POSITION
CONTINUITY
BETWEEN
FUNCTION
Up
-
Run
Down BK/BLU and
BLK
Shutdown
BATTERY / ELECTRICAL