Polaris 850 PRO-RMK 155 2.6" QD 2021, Manual

Page: 173 / 747

2
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
2.37
QUICKDRIVE LOW INERTIA SYSTEM
Inspect as outlined in the periodic maintenance table.
Belt replacement is required every 2,000 miles (3,200
km).
Inspect the drive system for the following items:
• Verify there are no missing drive cogs on the inside
circumference of the belt
q
• Verify there is no damage to the belt outer cover
• Inspect the upper
w
and lower sprockets
e
for
damage to the sprocket teeth
QuickDrive Low Inertia System Notes:
• The break-in period for a new drive belt is 100 miles
(160 km). During this period, the belt will shed a mold
release compound. As the compound sheds, it is
normal to see some amount of fiber-like material in
and around the drive system. Use a dry rag to clean.
• An audible sound may be heard during break-in. After
the break-in period, the drive system will sound similar
to a traditional chaincase.
• Do not crimp belt
• Do not back bend belt
• Do not twist belt
• Do not pry on belt to remove
• Store belt in original package - do not hang
• Avoid contact with solvents, oils, or chemical cleaners
MAINTENANCE