Polaris 850 PRO-RMK 155 2.6" QD 2021, Manual

Page: 607 / 747

9
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
9.19
BONDED COMPONENT SERVICE
LORD 406 ACRYLIC ADHESIVE
INFORMATION
Review and understand the following product handling
practices and first aid measures prior to working with
bonding adhesive.
For additional handling, first aid, or MSDS information,
contact Lord at www.lord.com.
WARNING
Do not store Lord 406 Acrylic Adhesive or use near
heat, sparks, or open flame. Lord 406 Acrylic Adhesive
is flammable.
Handling Practices
Ventilation - Work in a well-ventilated area.
Respirator - Use properly-fitted, organic vapor, air
purifying respirator (face mask).
Skin Protection - Use neoprene or rubber gloves;
wash hands and exposed skin with soap and water
after working with the product.
Eye Protection - Wear safety glasses / goggles.
First Aid Measures
Eye Contact - Flush eyes immediately with large
amounts of water for at least 15 minutes holding eyelids
open while flushing; get prompt medical attention.
Skin Contact - Flush contaminated skin with large
amounts of water while removing contaminated
clothing; wash affected skin areas with soap and water;
and, get medical attention if symptoms occur.
Inhalation - Move the person to fresh air; restore and
support continued breathing; if breathing is difficult, give
oxygen; and, get immediate medical attention.
Ingestion - If swallowed, do not induce vomiting; give
the victim one or two glasses of water or milk; call a
physician or poison control center immediately for
further instructions; and, never give anything by mouth
if the victim is rapidly losing consciousness,
unconscious, or convulsing.
BONDED COMPONENT OVERVIEW
The following serviceable components are bonded with
structural adhesive:
• Left / right bulkhead clips are bonded to the left support
brace and chaincase
• Chaincase
• Left support bonded to tunnel
• Bulkhead floor plate
• Top of tunnel bulkhead cooler
NOTICE
The left and right bulkhead clips are not bonded to each
other.
Please read and understand the topics outlined on the
following pages before working with any bonded
component.
CHASSIS