Polaris 850 PRO-RMK 155 2.6" QD 2021, Manual

Page: 576 / 747

8.90
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
WALKER EVANS PIGGY BACK (HIGH/LOW
SPEED ADJ.)
WALKER EVANS PIGGYBACK SHOCK
DISASSEMBLY
WARNING
Shocks contain high pressure nitrogen gas. Extreme
caution must be used while handling and working with
shocks and related high pressure service equipment.
The pressure must be released from the shock before
disassembly. Wear safety glasses and ear protection
during these procedures.
NOTICE
To prevent damage or marks to the shock, the use of
soft jaws on a vise is recommended.
1. Clean and carefully remove shock from the
suspension.
2. Remove button head screw
q
from reservoir cap.
3. Insert safety needle carefully and depressurize the
shock.
4. Press the end cap into the reservoir to access the
snap ring.
5. Remove the snap ring
w
, then remove the cap
e
from the body. Discard the O-ring.
6. Place the shock lower eyelet in a vise.
7. Loosen and remove the bearing cap
r
from the
shock.
8. Remove the used oil from the shock body.
STEERING / SUSPENSIONS