Playnation Redbrook Deluxe 381, Manual

Page: 108 / 142

DIM "X"
DIM "X" + 1/2"
3"
DECK SPACER
BOTTOM PANEL
BOARD
INSIDE VIEW
UPPER LEVEL
2 X 6 X 22.625"
STEP 59: REAR BOTTOM PANEL BOARD
1: PLACE THE 2 X 4 X 42.5" REAR BOTTOM PANEL BOARD AT THE REAR OF THE FORT AND MAKE IT LEVEL WITH THE
PANEL / DECK SUPPORT ON THE SIDE OF THE UPPER LEVEL.
2: ATTACH THE 2 X 4 X 42.5" REAR BOTTOM PANEL BOARD USING 5/16" X 3-1/2" LAG SCREWS AND 5/16" WASHERS.
3: MOVE TO THE FRONT OF THE UPPER LEVEL AND MEASURE UP 6-3/8" FROM THE BOTTOM CONNECTOR SUPPORT
AND MAKE A MARK ON THE UPPER LEVEL CORNER POST.
4: PLACE THE TOP OF THE 2 X 6 X 22.625" BOTTOM PANEL BOARD ON THE MARK. MAKE SURE IT IS FLUSH TO THE
UPPER LEVEL CORNER POST ON THE LEFT SIDE AND FLUSH TO THE LAG POST ON THE OTHER SIDE (SEE THE DIAGRAM
BELOW FOR DETAILS).
5: MAKE SURE THE BOTTOM PANEL BOARD IS LEVEL AND FASTEN USING TWO 5/16" X 3-1/2" LAG SCREWS WITH 5/16"
WASHERS.
6: MEASURE DOWN FROM THE TOP OF THE BOTTOM PANEL BOARD TO THE TOP OF THE DECK SPACER BEHIND IT
(DIM "X"). ADD 1/2" TO DIM X AND TRANSFER (DIM X + 1/2") TO THE FRONT FACE OF THE BOTTOM PANEL BOARD AT
APPROXIMATELY 3" AWAY FROM THE LAG POST AND MAKE A MARK.
7: FASTEN IT USING ONE #8 X 2" WOOD SCREW AT THE MARK ON THE BOTTOM PANEL BOARD INTO THE DECK
SPACER BEHIND IT. (SEE DIAGRAM BELOW FOR MORE DETAILS) DIM "X"
CORNER POST
UPPER LEVEL #8 X 2" WOOD SCREW
/ DECK
SUPPORT
BOTTOM PANEL BOARD
5/16" X 3-1/2" LAG SCREW
5/16" WASHER
UPPER LEVEL CORNER POST
2 X 4 X 42.5" REAR
PANEL
EXTREME SLIDE
POST
5/16" X 3-1/2" LAG SCREW
CORNER POST
LAG POST
FLUSH
FLUSH
UPPER LEVEL
2 X 6 X 22-5/8"
BOTTOM PANEL
BOARD
APPROX. 6 38 "
98