STEP 17: ANGLE SUPPORTS
1: FOUR 2 X 4 X 13" ANGLE SUPPORTS ARE MOUNTED UNDERNEATH THE DECK ON THE LEFT
AND RIGHT OF THE FORT. (THESE ARE CALLED OUT BY THE LETTER "X")
2: ATTACH EACH ANGLE SUPPORT (X) TO THE DECK WITH TWO 2-1/2" WOOD SCREWS AT
THE TOP GOING THROUGH THE ANGLE SUPPORT (X) INTO THE DECK SUPPORT. ATTACH
THE BOTTOM OF THE ANGLE SUPPORT (X) TO THE CORNER POST WITH ONE 2" WOOD
SCREW AND ONE 3" WOOD SCREW.
3: FOUR 2 X 4 X 13" ANGLE SUPPORTS ARE MOUNTED UNDERNEATH THE DECK ON THE
FRONT AND REAR SIDES OF THE FORT. (THESE ARE CALLED OUT BY THE LETTER "Q")
4: ATTACH EACH ANGLE SUPPORT (Q) TO THE PANEL SUPPORT WITH TWO 2-1/2" WOOD
SCREWS AT THE TOP GOING THROUGH THE ANGLE SUPPORT (Q) FIRST AND THEN INTO THE
PANEL SUPPORT. ATTACH THE BOTTOM OF THE ANGLE SUPPORT (Q) TO THE CORNER POST
WITH ONE 2" WOOD SCREW AND ONE 3" WOOD SCREW.
PANEL SUPPORT
X
Q
X
Q
Q
X
X
Q
DECK SUPPORT
DECK SUPPORT
PANEL SUPPORT
2-1/2" WOOD SCREW
X
Q
DECK SUPPORT
PANEL SUPPORT
3" WOOD SCREW
3" WOOD SCREW
2" WOOD SCREW
2" WOOD SCREW
2-1/2" WOOD SCREW
55
Summary of Contents for Redbrook Deluxe 381
