ROCK WALL SIDE TOP PANEL BOARD
STEP 5: PANEL SUPPORTS AND
1: USE A HAMMER TO SEAT THE T-NUTS AFTER INSERTING THEM INTO THE HOLES SHOWN IN THE
DIAGRAM BELOW.
2: THE 2 X 4 X 47-3/8" PANEL SUPPORTS (OFFSET HOLES UP) ATTACH TO THE SIDES OF THE FRONT
AND REAR CORNER POSTS WITH TWO 5/16" X 4-1/2" HEX BOLTS AND TWO 5/16" WASHERS.
3: THE 2 X 4 X 47-3/8" ROCK WALL SIDE TOP PANEL BOARD (OFFSET HOLES UP) ATTACHES TO THE
SIDE OF THE LEFT CORNER POSTS WITH TWO 5/16" X 4-1/2" HEX BOLTS AND TWO 5/16" WASHERS.
5/16" X 4-1/2"
PANEL SUPPORT
TOP PANEL BOARD
HEX BOLT
5/16" WASHER
HEX BOLT
PANEL SUPPORT
(OFFSET HOLES UP)
PANEL SUPPORT
2 X 4 X 47-3/8"
5/16" WASHER
2 X 4 X 47-3/8"
(OFFSET HOLES UP)
(OFFSET HOLES UP)
(OFFSET HOLES UP)
2 X 4 X 47-3/8"
T-NUT
2 X 4 X 47-3/8"
ROCK WALL SIDE
5/16" X 4-1/2"
T-NUT
43
Summary of Contents for Redbrook Deluxe 381
