Playnation Redbrook Deluxe 381, Manual

Page: 112 / 142

DIM A
OVERHANG
ROOF STARTER LENGTH
"
2
30 1
EXAMPLE DIMENSION
23 58 "
DIM B
OVERHANG
EXAMPLE: 30-1/2" MINUS 23-5/8"
EQUALS 6-7/8" DIVIDED BY 2
EQUALS 3-7/16" OVERHANG
PER SIDE.
#8 X 1-1/2" WOOD SCREW
1 X 4 X 30.5" ROOF STARTER
OVERLAPING.
ROOF SUPPORT
PLACE AS CLOSE
TOGETHER AS POSSIBLE
WITHOUT THE STARTERS
ROOF SUPPORT
STEP 63: UPPER LEVEL ROOF
1: PLACE THE 1 X 4 X 30-1/2" GROOVE-ONLY ROOF STARTER BOARDS AT THE PEAK OF THE ROOF. THE
HOLES IN THE ROOF STARTERS SHOULD BE APPROXIMATELY CENTERED (SEE BELOW) ON THE ROOF
SUPPORTS, AND THE FLAT ENDS OF THE ROOF STARTERS SHOULD BE PLACED AS CLOSE TO EACH OTHER
AS POSSIBLE WITHOUT THE BOARDS OVERLAPPING.
2: FASTEN THE ROOF STARTER BOARDS TO THE ROOF SUPPORTS WITH 1-1/2" WOOD SCREWS.
MEASURE DIM A ACROSS THE BOTTOM OF THE ROOF SUPPORTS NEAR THE CORNER POSTS. WHEN
ATTACHING THE ROOF STARTERS DIM B AT THE ROOF PEAK SHOULD MATCH DIM A. THIS WILL MAKE THE
ROOF SUPPORTS PARALLEL TO EACH OTHER. DUE TO WOOD MILLING VARIATIONS YOUR HOLES IN THE
ROOF STARTERS WILL EITHER BE CENTERED ON THE ROOF SUPPORTS OR THEY WILL BE OFFSET TOWARDS
THE INSIDE OF THE ROOF SUPPORTS SLIGHTLY. SUBTRACT DIM A FROM 30-1/2" AND THEN DIVIDE THIS
NUMBER BY 2. THIS WILL GIVE YOU THE OVERHANG FOR EACH SIDE. USE THE OVERHANG NUMBER ON
EACH SIDE TO KEEP YOUR ROOF SUPPORTS PARALLEL.
102