Playnation Redbrook Deluxe 381, Manual

Page: 100 / 142

5/16" WASHER
T-NUT
5/16" X 4-1/2" HEX BOLT
STEP 52: EXTREME SLIDE POST AND DECK SPACER
1: USE A HAMMER TO SEAT THE T-NUT AFTER INSERTING IT INTO THE REAR TOP PANEL BOARD
PRE-DRILLED HOLE SHOWN IN THE DIAGRAM BELOW.
2: FIND ONE 4 X 4 X 39.875" EXTREME SLIDE POST AND MOUNT TO THE REAR TOP PANEL BOARD
USING ONE 5/16" X 4-1/2" HEX BOLT AND 5/16" WASHER THROUGH THE COUNTER-SUNK HOLE.
3: FIND A 5/4 X 4 X 36.75" UPPER REAR DECK SPACER
AND INSERT IT INTO THE SLOT LOCATED AT THE
BOTTOM SIDE OF THE EXTREME SLIDE POST AS SHOWN
IN THE DIAGRAM BELOW.
4: FASTEN THE UPPER REAR DECK
SPACER TO THE DECK SUPPORT USING
TWO #8 X 2" WOOD SCREWS.
UPPER LEVEL UNDER DECK SUPPORT
5/4 X 4 X 36.75"
PANEL BOARD
REAR TOP
EXTREME SLIDE POST
4 X 4 X 39.875"
EXTREME SLIDE POST
4 X 4 X 39.875"
UPPER REAR DECK SPACER
5/4 X 4 X 36.75"
UPPER REAR DECK SPACER
3/8" WASHER
#8 X 2" WOOD SCREWS
4 X 4 X 49.875"
EXTREME SLIDE POST
5: SECURE THE EXTREME SLIDE
POST TO THE UPPER LEVEL UNDER
DECK SUPPORT WITH A 3/8" X 5"
LAG SCREW AND 3/8" WASHER
THROUGH THE COUNTER SUNK HOLE.
3/8" X 5" LAG SCREW
90