Playnation Redbrook Deluxe 381, Manual

Page: 98 / 142

UPPER LEVEL
T-NUT
T-NUT
T-NUT
T-NUT
5/16" WASHER
5/16" WASHER
5/16" WASHER
5/16" WASHER
5/16" WASHER
5/16" X 4-1/2" HEX BOLT
5/16" X 4-1/2" HEX BOLT
5/16" X 4-1/2" HEX BOLT
SUPPORT
5/16" X 4-1/2" HEX BOLT
CORNER POST
DECK SUPPORT
2 X 4 X 37.188"
UPPER LEVEL
SUPPORT
RIGHT CORNER POST
CORNER POST
UPPER LEVEL
CORNER POST
2 X 4 X 30.625"
PANEL/
DECK
CONNECTOR
LAG POST
5/16" X 3-1/2" LAG SCREW
STEP 50: DECK SUPPORTS
1: USE A HAMMER TO SEAT THE T-NUTS AFTER INSERTING THEM INTO THE HOLES SHOWN IN THE
DIAGRAM BELOW.
2: FIND THE 2 X 4 X 37.188" DECK SUPPORT (WITH ONE END HOLE OFFSET DOWN) AND MOUNT
TO THE RIGHT SIDE OF THE FORT AS SHOWN BELOW. FASTEN TO THE UPPER LEVEL CORNER POST
AND TO THE LAG POST USING TWO 5/16" X 4-1/2" HEX BOLTS WITH 5/16" WASHERS THROUGH THE
REAR COUNTER SUNK HOLE AND THROUGH THE MIDDLE COUNTER SUNK HOLE. THE FRONT
COUNTER SUNK HOLE (OFFSET DOWN) WILL TAKE ONE 5/16" X 3-1/2" LAG SCREW WITH ONE
5/16" WASHER AND WILL GO INTO THE RIGHT CORNER POST.
3: FIND ONE 2 X 4 X 30.625" PANEL/
DECK
SUPPORT AND MOUNT TO THE LEFT SIDE OF THE FORT
AS SHOWN BELOW. FASTEN TO THE UPPER LEVEL CORNER POSTS USING 5/16" X 4-1/2" HEX BOLTS
WITH 5/16" WASHERS
88