60
EN001 H01
14. Error messages
Error messages are indicated by a bleep. A permanent bleep can be interrupted by pressing the red stop
button.
14.1 General error messages
Code
Error
Cause
Reaction
EMI Error
Electronic out of order
or defect
Contact service
EMI Error 2
Electronic out of order
or defect
Contact service
Emergency cut-out
Welding was interrupted by
pressing the red stop button
Welding is faulty!
Memory overflow
Report memory is full
Print reports or deactivate the
memory control option.
System error
Danger !Selftest has detected an
error in the system.
Immediately disconnect the device
from the power supply. Do not
connect the device to the power
supply. Send the controller
to a certified service point
Clock error
Internal clock does not
work properly
Set clock, change battery if
necessary
Service
The recommended service
interval of 12 months or 200
working hours are exceeded.
The device must be serviced by
certified personnel or a service
point.
The device remains usable. The
manufacturer is not liable until the
device has undergone maintenance.
