26
EN001 H01
11.3 Pairing via Bluetooth*
Attention!
The Bluetooth functionality is only available in electrofusion control units made by PF-
Schweißtechnologie GmbH that are equipped with a Bluetooth module.
In order to make the electrofusion control unit visible for your mobile device, the option "BT on"
must be activated in the system configuration.
Pairing is possible only when using the app of the manufacturer of the electrofusion control unit. To
use the app and its functions a registration is mandatory. For further information please contact you
distributor or PF-Schweißtechnologie GmbH.
11.3.1 Option „BT on“ active, „BT only“ inactive
Step
Action
1
Display after switching on, if "BT on" is active
1.1
The electrofusion control unit shows the following display. Now you can use the app to pair the
electrofusion control unit with your mobile device.
Display after switching on
Row 1 shows the ID that can be used to detect the device, using Bluetooth. By pressing the enter
button you can access the system configuration.
Row 2 shows the Text "Waiting for App". The electrofusion control unit signalizes its readiness for
pairing via the app.
Row 3 shows the text "STOP: Cancel". To proceed without Bluetooth connection press the red
stop button.
Enter button
By pressing the enter button you can access the system
configuration. You will need, depending on the setting ("Code
Sys" on or off) an admin code to get access.
Red stop button
You can abort the Bluetooth pairing and return to the main
display of the electrofusion control unit by pressing the red stop
button.
1.2
OPT
Now continue the pairing procedure in the "ElectroFusion Studio" app on your mobile device. As
soon as the electrofusion control unit is successfully detected and paired by the app, it can be
used to operate it.
1.2
OPT
If you want to proceed without Bluetooth connectivity, press the red stop button. You will be taken
to the main display of the electrofusion control unit. The operation must be done on the controller.
(To do that, "BT only" must be deactivated in the system configuration.)
***) Only with electrofusion control units that have Bluetooth functionality.
#10020981
↵
Menu
Waiting for App
STOP: Cancel
