EN001 H01
31
Step
Action
3
After the welding parameters have been determined, the electrofusion control unit shows
the following information in the display:
Display of the determined welding parameters
Row 1 indicates that you have to press the green start button to start the welding process. Before
continuing you are obliged to cross check if the welding time, manufacturer, diameter and type are
compliant to the connected fitting.
Row 2 shows the welding time.
Row 3 shows the manufacturer, type and welding voltage of the fitting as well as the ambient
temperature.
It is imperative that the parameters displayed match the parameters written on the fitting by
its manufacturer.
11.5.2 Starting the welding procedure with SmartFuse
Step
Action
4
Starting the welding procedure
4.1
To start the welding procedure with the displayed parameters press the green start button.
5 OPT
OPTIONAL: Clamping
5.1
OPT
OPTIONAL: After pressing the green start button a display message reminds you of your duty to
fix and clamp the pipes. If your electrofusion control unit has this option and you have activated it
in the system configuration, the following message will appear in the display:
Prompt for confirmation of performed pipe clamping
Green start button
By pressing the green start button you confirm that you have
clamped the pipes according to the regulations.
Red stop button
By pressing the red stop button you confirm that you do not
have clamped the pipes.
The statement you make here will be logged in the welding report.
Start
Nom. time: 30 s
PLA 40 V +20°C
Pipes clamped?
Nom. time: 30 s
PLA 40 V +23°C
