46
EN001 H01
Step
Action
3
Erasing of reports that are stored under the selected job number
3.1
After you have pressed the green start button, the following display will be shown:
Prompt before erasure
Enter button
Confirms the prompt for erasure
Green start button
No function
Red stop button
Abort and return to the main display
3.2
Confirm this prompt by pressing the enter button. Confirm the following safety prompt "Are you
sure ?" by pressing the green start button. The reports stored under the job code are erased and
the job number is erased from the memory of the electrofusion control unit.
3.3
After the erasure the display with the job numbers will be shown. You can delete other reports or
press the red stop button to return to the main display.
12.5 Contrast (Display)
This function enables you to adjust the display contrast to the lighting condition in your work area.
Step
Action
1
Selecting the entry "Contrast"
1.1
Select the entry "Contrrast" in the function menu, using the ▲
-
and ▼
-buttons.
1.2
Then press the enter button to select the function.
2
Setting of the contrast
Setting of the contrast
▲
Increases the contrast value
▼
Decreases the contrast value
Green start button
Accepts the indicated contrast value
Red stop button
Pressing the red stop button cancels and returns to the main
display.
2.1
If you have changed the contrast value and acknowledged it by pressing the green start button a
safety prompt will be displayed. You can acknowledge the prompt by pressing the green start
button. Press the red stop button to return to the main display.
TEST
Erase ?
Contrast
240
