EN001 H01
57
12.6.13 Code Del.*
If this option is activated you will have to enter an access code when trying to acces the "Erase reports" entry
in the device menu.
Step
Action
1
Accessing the "Code Del." option
1.1
Select the entry "Code Del." in the system configuration, using the ▲
-
and ▼
-buttons.
2
Changing the "Code Del." option
2.1
The ◄ ► buttons are used to move the marking (*) from the "activated" (+) column to the
„deactivated“ (-) column and vice versa.
2.2
After having this option changed in the system configuration press the green start button to accept
the change and acknowledge the following safety prompt "Are you sure?"by again pressing the
green start button.
You can abort the input by pressing the red stop button.
3
Menu entry "Erase reports ?" is locked
3.1
Accessing the function "Erase reports".
3.2
If the option "Code Del." is activated, the following prompt will appear:
Prompt for an unlocking- resp. supervisor code to
unlock the erase-function for the stored reports.
3.3
Read in the unlocking- resp. supervisor code using the reading pen/scanner or press the enter
button to enter the code by using the letter field. If you use the letter field, press the green start
button after the input to confirm the entered code.
Attention!
If "Code Lock" is active when "Code Del." is activated, "Code Sys." will be activated automatically.
This ensures, that reports can only be deleted from the memory of the electrofusion control unit if
an unlocking- resp. supervisor code is entered beforehand. Additionally "Code Sys." prevents
access to the system configuration without an unlocking- resp. supervisor code.
*) Only with electrofusion control units that have data recording capability.
Operatorcode
50 Hz 230 V +23°C
