Pitney Bowes EDGE 7.11, Reference Manual

Page: 112 / 896

PBX Setup Coded Project
Telephony Gateway Reference Manual 112
Properties:
Coded proj-
ect selection
setup The DNIS or VDN number to be set up. Your entry can be
up to 10 characters. To create a default record, enter the
word DEFAULT. For more information, see
Default Map-
ping .
The code can contain any characters, including spaces.
For example, TEST STUDY is a valid code. Codes are
case-sensitive. For example, the system considers
REBATE and rebate as different codes.
The DNIS number that is received by EDGE may not be
the entire phone number that was dialed. Some tele-
phony APIs truncate this to the last four digits, or trans-
late it to some other number defined on the API. For
more information on determining the DNIS used, see
your gateway documentation.
Project name The project to associate with the DNIS or VDN number;
must be selected from the drop-down list box.