manualshive.com logo in svg

Pitney Bowes EDGE 7.11, Reference Manual

Share
Download
Pitney Bowes EDGE 7.11 Reference Manual Download Page 491

Files, Fields, and Screens

SYS Fields

Telephony Gateway Reference Manual

491

$TP.INEXT

Only used with the PBX Gateways.

$TP.INVDN

Not used with the Dialer Gateways. Not used 
with the Davox Gateway.

$TP.LOCATION

Only used with the Genesys Gateway. 

$TP.OUTEXT

$TP.SETTYPE

Only used with the Aspect and Aspect CS Gate-
way.

$TP.SWINFGROUP

Only used with the Rockwell Gateway. Obsolete. 
Retained for backward compatibility.

$TP.SWLOGIN

Only used with the Aspect, Aspect CS and Davox 
Gateways.

$TP.SWNUM

Only used with the Rockwell Gateway. Obsolete. 
Retained for backward compatibility.

$TP.SWPASS

Only used with the Aspect, Aspect CS and Davox 
Gateways.

$TP.SWSUPNUM

Only used with the Rockwell Gateway. Obsolete. 
Retained for backward compatibility.

$TP.UNAVAIL

Not used with the Davox and EIS Gateways.

$TP.USER

$TP.VRU

$TPHNYDEV

Table 11-1. EDGE Telephony SYS Fields  (continued)

SYS field

Notes

Summary of Contents for EDGE 7.11

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands