manualshive.com logo in svg

Pitney Bowes EDGE 7.11, Reference Manual

Share
Download
Pitney Bowes EDGE 7.11 Reference Manual Download Page 508

Troubleshooting

Dialer Gateway Problems

Telephony Gateway Reference Manual

508

•

The queues in the callset definition do not contain any calls or
are not open. If the Filter Ad Hoc feature is used, it is possible
that there are no calls being selected. To correct this, check
the callset definition on the Queues tab to ensure that the
appropriate queues are included and the correct Filter Ad
Hoc ID is specified. Also check that the queues are open. For
more information, see the section 

Callsets

.

•

The DIALER queue is not defined for the project. To correct
this, create a DIALER queue. For information, see the section

DIALER Queue Setup

.

•

There is a corrupt EDGE file such as STATUS, queues, or
PDW_QUEUE. These are the files involved in sending calls to
the dialer. To correct this, use the filecheck utility to check
each of these files, and correct using the FIXFILE utility when
there are no users on the system. For information on the FIX-
FILE and filecheck utilities, see the EDGE 7.11 ETW-W Refer-
ence Manual.

Agents Do Not 
Receive Calls, 
Dialer Is Not Idle

An agent is not receiving any calls but the dialer is not idle. The fol-
lowing are possible reasons:

•

The agent has logged in with an incorrect workstation ID. To
correct this, have the agent log out and log back in using the
correct workstation ID. 

Summary of Contents for EDGE 7.11

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands