manualshive.com logo in svg

Pitney Bowes EDGE 7.11, Reference Manual

Share
Download
Pitney Bowes EDGE 7.11 Reference Manual Download Page 650

CV/LAN

Use of dialing sequences

Telephony Gateway Reference Manual

650

appropriate. EDGE supports CV/LAN with DEFINITY switches config-
ured either with or without EAS. For more information on EAS and
ACD groups, consult your DEFINITY switch documentation.

Use of dialing 
sequences

There are two methods that EDGE may use to perform agent 
login/logout functions and change availability. One method 
involves placing an actual call to the switch by dialing the 
sequence of digits the agent would normally use if they were to 
log in manually on their phone. The second involves native 'fea-
ture request' commands. This method is inherently more reliable 
because EDGE is able to detect errors with the actual command 
being requested, compared to dialing sequences where EDGE 
can only detect if the call was successfully placed (not, for exam-
ple, if the agent was actually logged in successfully).

In almost all circumstances, it is recommended that the feature 
request method is used rather than dialing sequences. There are 
a few subtle differences in the way that these methods work 
which may require dialing sequences though. For example, on 
some switch versions if an agent is on a call (off-hook) and a 
request is made to change the agents' availability, the command 
may fail using the feature request method. When using a dialing 
sequence, the request is 'queued' up in the switch, so that the 
agents availability is changed immediately after the call has been 
disconnected.

Summary of Contents for EDGE 7.11

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands