Piper Aircraft Corporation Malibu Mirage PA-46-350P, Airplane Maintenance Manual

Page: 1369 / 1956

PAGE 9
Feb 28/07 7D19
71-00-00
PIPER AIRCRAFT, INC.
PA-46-350P, MALIBU MIRAGE
MAINTENANCE MANUAL
(12) Connect the oil pressure line.
(13) Install the fittings in the vacuum pumps (refer to 37-10-00) and attach the lines to the pumps.
(14) Connect the tachometer leads at the engine magneto sensors.
(15) Connect the engine oil temperature lead to the aft end of the engine.
(16) Connect engine vent tube to the engine.
(17) Connect the magneto p-leads to the magnetos.
(18) Connect oil filter lines to the oil cooler and engine.
(19) Connect the fuel pump supply line to the fuel pump.
(20) Attach the turbocharger air inlet ducts to the turbochargers.
(21) Connect the throttle and mixture cables to the injector.
(22) Connect the heated air hose to the heat muff.
(23) Connect the propeller governor control cable to the governor. Secure the control cable with the
clamps.
(24) Connect the starter positive and ground leads to the starter. Secure the leads with the clamps.
(25) Connect the air conditioning compressor lines, if the air conditioning is installed.
(26) Ensure that any other lines, hoses or electrical leads that were disconnected during removal of
the engine are now reconnected.
(27) Reinstall the propeller (refer to 61-10-00).
(28) Reinstall the engine cowling.
(29) Add the proper grade and amount of engine oil (refer to 12-10-00).
(30) Turn on the fuel valve, open the throttle full and turn on the electric fuel pump. Check the fuel
lines for leaks.
(31) Service the air conditioning system.
(32) Refer to 81-20-00 for information on pre-lubricating the turbochargers.
(33) Perform an engine operational check. Inspect for any leaks and make final adjustments to
engine controls as required.