Piper Aircraft Corporation Malibu Mirage PA-46-350P, Airplane Maintenance Manual

Page: 539 / 1956

PAGE 1
Feb 28/07 3C19
27-10-00
PIPER AIRCRAFT, INC.
PA-46-350P, MALIBU MIRAGE
MAINTENANCE MANUAL
AILERON AND TAB
1. Troubleshooting
See Chart 1.
2. Control Wheel
A. S/N’s 4636001 thru 4636020 only.
NOTE: In these airplanes, the control wheel and tube can be removed as a unit, see Control
Column, S/N’s 4636001 thru 4636020, below. Disassembly of the control wheel from the
tube is not normally required.
(1) Removal
(a) Remove two screws from bottom of control wheel and remove cover/pad assembly to gain
access to locknut.
(b) Remove control wheel attachment bolt, spacer, washer, and locknut. Note build up to
facilitate reinstallation.
(c) Slide control wheel off of tube.
(d) If not already done, disconnect control wheel switches wiring harness.
(2) Installation
(a) Connect control wheel switches wiring harness.
(b) Slide control wheel onto tube.
(c) Position and secure control wheel attachment bolt, spacer, washer, and locknut.
(d) Position cover/pad assembly and secure with two screws from bottom of control wheel.
B. S/N’s 4636021 thru 4636131 only.
(1) Removal
(a) Remove two screws from bottom of control wheel and remove cover/pad assembly to gain
access to locknut.
(b) Remove control wheel attachment bolt, spacer, washer, and locknut. Note build up to
facilitate reinstallation.
(c) Slide control wheel off of tube.
(d) If not already done, disconnect control wheel switches wiring harness.
(2) Installation
(a) Connect control wheel switches wiring harness.
(b) Slide control wheel onto tube.
(c) Position and secure control wheel attachment bolt, spacer, washer, and locknut.
(d) Position cover/pad assembly and secure with two screws from bottom of control wheel.