Piper Aircraft Corporation Malibu Mirage PA-46-350P, Airplane Maintenance Manual

Page: 1271 / 1956

PAGE 5
Feb 28/07 6K15
57-40-00
PIPER AIRCRAFT, INC.
PA-46-350P, MALIBU MIRAGE
MAINTENANCE MANUAL
B. Installation
NOTE: When installing a “replacement” wing or wing section, perform Stall Warning Flight Test
Procedure, 27-30-00, upon completion of wing installation.
(1) Carefully position the outboard wing in alignment with the splice plates on the inboard wing
main and rear spars.
(2) Using a string of suitable length extended from the inboard wing leading edge next to the
fuselage out to the outboard wing tip to help maintain true alignment of the wing sections. Also,
extend a string from the wing tip to the stabilizer, marking its length and checking this with the
opposite wing and stabilizer, using the same reference points on both wings and stabilizers.
(3) While maintaining proper alignment of the wing, install the Hi-Lok pins and rivets into the spars
and splice plates per Figure 3. Refer to the PA-46-350P Illustrated Parts Catalog, P/N 761-878,
for correct rivet part numbers and locations.
SECTION B - B
(ROTATED 9 0˚)
(LOOKING DOWN)
SPLICE ANGLE
IS PART OF
OUTBOARD
WING ASSY.
OUTBOARD
HL1 9 -6-8
HL1 9 -6- 9
HL1 9 -6-10
W.S.
107.50
SKIN
SKIN
8 9 640 AP
FWD
Outboard Wing Installation
Figure 2 (Sheet 3 of 3)
Effectivity
4636196 & up