Piper Aircraft Corporation Malibu Mirage PA-46-350P, Airplane Maintenance Manual

Page: 466 / 1956

PAGE 2
Feb 28/07
2K4
25-20-00
PIPER AIRCRAFT, INC.
PA-46-350P, MALIBU MIRAGE
MAINTENANCE MANUAL
(4) The armrest may be removed from the side of the pan assembly by removing the nuts, bolts
and washers that attach the armrest to the armrest support/side of the pan assembly.
(5) Remove the pan assembly from the floor.
B. Installation
(1) Position the pan assembly on the floor.
(2) Attach the armrest (if previously removed) to the side of the pan with the nuts, bolts and
washers.
(3) Secure the channel to the outboard side of the pan bottom/floor with the aft three bolts and
washers.
(4) Secure the armrest support and the seat back assembly support to the inboard side of the pan
bottom with the bolts and washers. Install the forward inboard bolt.
(5) Install the seat back actuator into the channel as follows:
(a) Position the seat back actuator into the channel.
(b) Slide the bolt into the aft holes in the channel, placing on the bolt (in order): washer (if
required), bushing, aft fitting of seat back actuator, roller, washer (if required) and nut.
(c) Insert a pin in each side of the stop assembly and secure them with cotter pins.
(d) Secure the seat back release cover to the forward portion of the channel with the nut and
bolt.
(e) Attach the cable assembly to the forward end of the seat back actuator.
(6) Attach the seat back/seat back support to the bottom of the pan assembly and aft portion of
channel.
(7) Reinstall the seat bottom filler assembly on the seat bottom pan assembly.
3. Cabinets (Optional)
The two cabinets are located between the crew seats and the forward passenger seats. They are
secured to the floor by four bolts and washers (torque to 20-25 in. lbs.).
4. Conference Table (Optional)
The conference table is located between the center and aft passenger seats on the right side panel just
below window level opposite the cabin door. The table assembly is secured by 3 screws and washers.