Storing and recalling broadcast
frequencies
With a touch of any of the preset tuning keys
([
P1
] to [
P6
]), you can easily store up to six
broadcast frequencies for later recall (also
with the touch of a key).
Preset tuning keys
1
When you find a frequency that you
want to store in memory, touch and hold a
preset tuning key [P1] to [P6] until the pre-
set number (e.g., P. C 1) appears.
The selected radio station has been stored in
memory.
2
The next time you touch the same pre-
set tuning key [P1] to [P6], the radio station
frequencies are recalled from memory.
p
You can also use [
c
] and [
d
] to recall radio
stations assigned to preset tuning keys [
P1
]
to [
P6
].
Using the
“
Function
”
menu
1
Touch [AM] on the
“
AV Source
”
menu
to display the
“
AM
”
screen.
=
For details concerning operations, refer to
Screen switching overview
on page 36.
2
Touch
.
1
2
1
Storing the strongest broadcast fre-
quencies
=
For details, refer to this page.
2
Tuning in strong signals
=
For details, refer to this page.
Storing the strongest broadcast
frequencies
“
BSM
”
(best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys [
P1
] to
[
P6
] and, once stored there, you can tune in to
these frequencies with the touch of a key.
%
Touch [Start] to turn BSM on.
BSM
begins to flash. While
BSM
is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys [
P1
] to
[
P6
] in order of their signal strength. When
this is complete,
BSM
stops flashing.
p
To cancel the storage process, touch
[
Stop
].
p
Storing broadcast frequencies with
BSM
may replace broadcast frequencies you
have already saved by using [
P1
] to [
P6
].
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1
Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [
Off
].
2
Touch [
c
Prev] or [Next
d
] to set the sen-
sitivity.
There are two levels of sensitivity for AM.
Level:
1
—
2
p
The level
“
2
”
setting allows reception of only
the strongest stations, while lower settings
let you receive weaker stations.
En
109
Chapter
15
Using
the
radio
(
AM
)
Using the radio (
AM
)
Summary of Contents for AVIC-Z110BT
