4-22
Automatic Flight Control System Operation
The flight director uses the data displayed on either PFD for calculation of the guidance
commands. The pilot may toggle his selection by pressing the L/R button on the flight
controller. The AFCS transmits the pilots selection to the display. The display will indicate the
PFD data selected for use, by displaying the couple arrow pointing toward the selected PFD
(left/right). At power up, the default setting is L pilot side PFD.
A brief description of the AFCS is given in Section 7 of this POH. Refer to the Pilot’s Guide for
the Advanced Cockpit Environment (ACE
TM
) (powered by Honeywell) for the Pilatus
PC-12/47E for complete information on the description and operation of the AFCS.
Section 4 - Normal Procedures (EASA Approved)
Automatic Flight Control System Operation
Pilot's Operating Handbook
Report No: 02406
Issue date: Mar 06, 2020
Page 4-22-1
12-C-A15-30-0422-00A-131A-A
FOR
GENERAL
AND
FAMILIARIZATION
PURPOSES
ONLY