SINGLE MITRE SAW 50
ENG Rev 1
page 40
Check that the cable which connect the machine to the electric power supply is in good state
and correctly positioned.
The user's electric power supply plant must conform to current electricity standard of the
Country where the machine is installed.
The network must have:
-
a unipotential ground circuit;
-
a protective device installed upstream of the machine that is set in such a way as to
guarantee the automatic breaking of the circuit in accordance with the above stated
specifications.
We suggest a conenction with male/female interlocking plugs following CE standards with
protection fuses and capacity adequate respect the absorption of the machine. We suggest to
use fuses suitable for starting up electric motor (AM).
Figure 29
– Electric connection
See ANNEX 3
IMPIANTO ELETTRICO for all information and scheme concerning the electric
circuit of the machine
The electric motor is protected against overload: if overheated, it stops automatically.
In case that this overheating occurs, let the motor cool and press the R restore button on the
RT1 relay (see electric diagram) to return to work conditions. If the electric motor overheats very
often, please contact the technical service
The informations relative to the inside electric plant of the machine are in enclosure
IG
Summary of Contents for Univer 50
