SINGLE MITRE SAW 50
ENG Rev 1
page 15
2.5.C
UTTING UNIT
This assembly consists of a cast iron structure for the transmission between the motor and the
blade and a set of mountings for the cylinder that controls the blade outward movement through
the rotating working table.
Te unit is located in the lower part of the machine, inside the steel frame.
The blade movement is powered by a hydraulic-pneumatic cylinder with a two-handed control
device which keeps both the operator’s hands occupied during the cutting operation (see
buttons SB1 and SB2 in Figure 7).
1 STEEL FRAME
4 CUTTING UNIT
2 REVOLVING WORKING TABLE
5 BLADE FEEDING ACTUATOR
3 FIXED WORKING TABLE
6 ELECTRIC MOTOR
Figure 10
– Cutting unit
Before carrying out any maintenance work, make sure the machine is
disconnected from all the power mains (electric and pneumatic) and dissipate
the residual power.
All connections to energy sources must be carried out by specialised personnel
and/or personnel authorised by the manufacturer to perform maintenance works
Summary of Contents for Univer 50
