SINGLE MITRE SAW 50
ENG Rev 1
page 14
2.4.1.P
ROFILE CUTTING ANGLE SETTINGS
For setting up the desired cutting angle, lift-up the upper safety guard using the handle (point 7
and point 8 in Figure 8) and follow the instructions below:
-
loosen the handle A
-
push the button B and rotate the head until you reach the desired cutting angle. Use the
fixed reference points (67.5° - 60° - 45° - 0° - 45° - 60° - 67.5°) or aling the reference index
C with the desired angle depicted on the rule D
-
lock the handle A.
A
TABLE LOCKING HANDLE
D
RULE FOR ANGULAR POSITION
B
HANDLE FOR UNLOCKING ROTATION
E
MOBILE TABLE
C
REFERENCE POINT FOR ROTATION ANGLE
F
CUTTING LINE
Figure 9 - Cutting angle settings
Summary of Contents for Univer 50
