SINGLE MITRE SAW 50
ENG Rev 1
page 42
ATTENTION
The blade has not a brake: its stop is NOT immediate but it needs some time for
a complete stop. The time needed for a complete stop depends from its
revolving speed, of the type of work, of the working material and of the
characteristics of the tool used (shape, dimensions, weight).
Do NOT get close to the cutting until the blade is completely stopped.
Do NOT operate if machine parts are still in motion, only after that the machine
is disconnected from any power source and that any residuals energy is
completely dissipated.
DANGER OF CUT AND BURN.
Wear always protective gloves before handling and/or working with tool
DANGER OF BURN: do not touch tool just before end working. Wait for the
temperature has slow down before touching it.
Any necessary intervention must be carried out by specialised personnel and/or
personnel authorised by the manufacturer to perform maintenance works
Before carrying out any maintenance work, make sure the machine is
disconnected from all the power mains (electric and pneumatic) and dissipate
the residual power.
Do not tamper with the electricl circuit
Do not modify any connection inside the electric cabinet
Contact PERTICI INDUSTRIES S.r.l. if necessary
4.9.C
ONNECTION TO SHAVING SUCTION SYSTEM
The machine has in its rear upper part a hood which can be connected to the external shaving
suction system.
Figure 30
– Connection to shaving suction system
Summary of Contents for Univer 50
