SINGLE MITRE SAW 50
ENG Rev 1
page 13
2.4.W
ORKING TABLE
The working table consists of a thick-gauge cast iron structure, mechanically attached to the
lower steel frame, with a plate which is able to rotate on the vertical axis. This allows angled
cuts to be made, from 0° to 67.5
on the LH side and from 0° to 67.5
on the RH side.
It is possible toget in touch with the working table by lifting up the steel-made upper safety
guard, using the lifting handle. A safety switch cuts the electric power and disables the rotation
of the cutting blade when the upper cover is lifted.
1
REVOLVING WORKING TABLE
5
PROFILE CLAMPING UNITS
2
WORKING FIXED TABLE
6
SAFETY SWITCH
3
CUTTING LINE
7
HANDLE OF UPPER SAFETY GUARD
4
PROFILE REFERENCE STOPS
8
UPPER SAFETY COVER
Figure 8
– Working table
All connections to energy sources must be carried out by specialised personnel
and/or personnel authorised by the manufacturer to perform maintenance works
Before carrying out any maintenance work, make sure the machine is
disconnected from all the power mains (electric and pneumatic) and dissipate
the residual power.
Contact PERTICI INDUSTRIES S.r.l. if necessary
Summary of Contents for Univer 50
