SINGLE MITRE SAW 50
ENG Rev 1
page 16
ATTENTION
The blade has not a brake: its stop is NOT immediate but it needs some time for
a complete stop. The time needed for a complete stop depends from its
revolving speed, of the type of work, of the working material and of the
characteristics of the tool used (shape, dimensions, weight).
Do NOT get close to the cutting until the blade is completely stopped.
Do NOT operate if machine parts are still in motion, only after that the machine
is disconnected from any power source and that any residuals energy is
completely dissipated.
DANGER OF CUT AND BURN.
Wear always protective gloves before handling and/or working with tool
DANGER OF BURN: do not touch tool just before end working. Wait for the
temperature has slow down before touching it.
Follow the values given by the manufacturers of the tools used for the maximum
allowed speed values and the correct cutting parameters related to the material
to be cut and the type of work to be done.
Never use tools at speed higher than the one allowed.
ATTENTION
Use only blades with the characteristics as specified in this handbook
IT'S MANDATORY to use anti-noise Widia blades, which have lower noise
emission levels than normal blades.
MAXIMUM BLADE OUTSIDE DIAMETER for working in safety conditions:
500mm (standard machine)
NEVER use blades with different dimensions as those specified in this
handbook
PERTICI INDUSTRIES S.r.l.
disclaims each responsibility in case the operator
does not respect what the requests of the manufacturer
Contact PERTICI INDUSTRIES S.r.l. if necessary
Summary of Contents for Univer 50
