SINGLE MITRE SAW 50
ENG Rev 1
page 63
ANNEX
3
IMPIANTO ELETTRICO
INDEX...................................................................................
INTRODUCTION..................................................................
WIRING DIAGRAM..............................................................
63
64
Drawings
THE DOCUMENTATION IS DIVIDED UP AS FOLLOWS:
-
CONTENTS
-
ELECTRICAL WIRING DIAGRAMS
-
LIST OF ELECTRICAL COMPONENTS
-
ELECTRICAL COMPONENTS LAY-OUT DRAWINGS
ELECTRICAL WIRING DIAGRAMS
On each page, the coordinates of a symbol can be found with the horizontal letters and vertical
number
the expression ---> Fig. A3.5-a1 indicates that the wire continues to fig. A3.5 coordinates a1
(top left)
the expression >--- Fig. A3.4-q1 indicates that the wire continues to fig. A3.4 coordinates q1
(top right)
When connectors are used, these are shown in the diagrams, marked alongside with the
number attributed to the connector (C 2) and the place taken by the wire inside the connectors
(12)
C 2
12
LIST OF ELECTRICAL COMPONENTS
THE LIST OF COMPONENTS IS BROKEN DOWN AS FOLLOWS:
RIF. (REFERENCE)
TAV (PAGE)
DESCRIZIONE (DESCRIPTION OF MATERIAL)
NUM. (NUMBER OF ITEMS)
TIPO (MATERIAL TYPE OR MANUFACTURER CODE)
FORNITORE (PRODUCER OF MATERIAL)
NS.CODICE (PERTICI CODE)
Summary of Contents for Univer 50
