Perkins New 1000 Series, Workshop Manual, Page: 88 / 290

14
88 Workshop Manual, TPD 1350, issue 3
New 1000 Series
6 Fit the cap with the location tags of both halves
of the shell bearings to the same side (A1). Tighten
the main bearing setscrews gradually and evenly to
265 Nm (196 lbf ft) 27,0 kgf m.
7 Check the crankshaft end-float , see operation 14-6 .
8 If necessary, fit the balancer unit , see operation 14-
12 .
9 If necessary, fit the lubricating oil strainer and the
suction pipe,
see operation 19-4.
10 Fit the lubricating oil sump, see operation 19-3,
and fill it to the correct level with an approved
lubricating oil.
1
A
A0107
Purchased from www.WorkshopManuals.co.uk