Perkins New 1000 Series, Workshop Manual, Page: 17 / 290

Workshop Manual, TPD 1350, issue 3 17
10
New 1000 Series
Engine identification
The Perkins New 1000 Series engines have been
designed for industrial and agricultural applications.
There are both four and six cylinder engines, each of
which will have three basic engine types, naturally
aspirated, turbocharged and turbocharged with an
intercooler.
In this workshop manual, the different engine types
are indicated by their code letters. These are the first
two letters of the engine number as indicated below:
Code letters Engine type
AJ Four cylinder, naturally
aspirated.
AK Four cylinder, turbocharged.
AM Four cylinder, turbocharged
and intercooled.
AP Four cylinder, naturally
aspirated, belt driven coolant
pump.
AQ Four cylinder, turbocharged,
belt driven coolant pump.
AR Four cylinder, naturally
aspirated, 103 mm cylinder
bore.
AS Four cylinder, naturally
aspirated, belt driven coolant
pump, 103 mm cylinder bore.
YG Six cylinder, naturally
aspirated.
YH Six cylinder, turbocharged.
YK Six cylinder, turbocharged and
intercooled.
The correct identification of the engine is by the full
engine number.
The engine number is stamped on a label which is
fastened to the left side (A2) of the cylinder block. An
example of an engine number is:
AK80920*U510256B*
If you need parts, service or information for your
engine, you must give the complete engine number to
your Perkins distributor. If there is a number in the
area of the label marked TPL N
o
, then this number
must also be given to your Perkins distributor.
Other identification labels fitted to the engine include:
An emissions legislation label (A3) fitted to the side of
the cylinder block.
A label (A1) with the fuel injection pump part numbers.
If a short engine has been fitted in service two engine
serial numbers and a TPL number are stamped on the
engine serial number pad (B3):
Examples of the serial numbers are shown in (B).
If parts for the short engine are needed in service, use
the serial number (B4). If parts which were moved
from the original engine to the short engine are
needed, use the serial number (B1) and the TPL
number (B2).
2 1
3
A
A0043
4
1
2
3
B
A0045
AK80920*U510256B*
AJ39770 TPL No 212
Purchased from www.WorkshopManuals.co.uk