Perkins New 1000 Series, Workshop Manual, Page: 245 / 290

Workshop Manual, TPD 1350, issue 3 245
21
New 1000 Series
To remove and to fit - canister type 21-14
To remove
1 Drain the cooling system.
2 Release the hose clips of the coolant pipes at the
oil cooler (A3). Release the threaded adaptor (A5)
from the lubricating oil cooler and pull the oil cooler
(A6) from the hose connections and the filter head
(A1).
To fit
1 Clean the joint face of the filter head (A2).
2 Check the washer (A4) and the seals (A7 and A8)
for damage. Renew the washer and the seals if they
are damaged or worn. Lightly lubricate the seals with
clean lubricating oil.
3 Push the hose connections for the coolant pipes
onto the lubricating oil cooler. Hold the oil cooler in
position against the filter head and fit the threaded
adaptor. Tighten the threaded adaptor to 37 Nm (27
lbf ft) 3,8 kgf m. Ensure that the hose connections are
fitted correctly and tighten the hose clips.
4 Fill the cooling system.
4
1
8
3
2
7 6
5
A
L0027
Purchased from www.WorkshopManuals.co.uk