Perkins New 1000 Series, Workshop Manual, Page: 20 / 290

10
20 Workshop Manual, TPD 1350, issue 3
New 1000 Series
Viton seals
Some seals used in engines and in components fitted
to engines are made of Viton.
Viton is used by many manufacturers and is a safe
material under normal conditions of operation.
If Viton is burned, a product of this burnt material is an
acid which is extremely dangerous. Never allow this
burnt material to come into contact with the skin or
with the eyes.
If it is necessary to come into contact with
components which have been burnt, ensure that the
precautions which follow are used:
! Ensure that the components have cooled.
! Use neoprene gloves and discard the gloves
safely after use.
!
Wash the area with calcium hydroxide solution
and then with clean water.
! Disposal of components and gloves which are
contaminated must be in accordance with local
regulations.
If there is contamination of the skin or eyes, wash the
affected area with a continuous supply of clean water
or with calcium hydroxide solution for 15-60 minutes.
Obtain immediate medical attention.
.
Purchased from www.WorkshopManuals.co.uk