manualshive.com logo in svg

PerkinElmer IVIS Lumina III Series, Hardware Manual

Share
Download
PerkinElmer IVIS Lumina III Series Hardware Manual Download Page 85

IVIS

®

 Lumina XRMS Series III Hardware Manual

Appendix A  |  XWS-260 Workstation

79

8.

Allow the system to initialize. 

You will hear the motors move. The System Status box displays the current changes. 

The temperature square in the IVIS Acquisition Control Panel is red at startup and turns green 
when the operating temperature is reached. The control panel displays the current temperature 
(

Figure A.2

).

The instrument is ready for operation after the temperature is locked at -90°C, as indicated by the 
green light in the control panel (

Figure A.2

. For operating instructions, see the Living Image

®

 

Software Manual for IVIS Lumina XRMS Series III.)

9.

To use the X-ray modality:

a.

Verify that the Emergency OFF switch is in the ON position.

b.

Turn the key selector switch to the ON position.

c.

Confirm that the amber arming switch has been pushed and the light is ON.

d.

Verify that the X-ray source is armed. 

e.

Use the IVIS Acquisition Control Panel in the Living Imaging software to turn on the X-ray 
source during an imaging sequence or session.

Figure A.2  

IVIS Acquisition Control panel – Living Image software

The temperature square is green when 
the operating temperature is reached. 
Click the temperature square to 
display the current temperature.

Summary of Contents for IVIS Lumina III Series




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands