manualshive.com logo in svg

PerkinElmer IVIS Lumina III Series, Hardware Manual

Share
Download
PerkinElmer IVIS Lumina III Series Hardware Manual Download Page 7

1 

Welcome 

The IVIS

®

 Lumina XRMS Series III is a high-sensitivity, low noise imaging system providing in vivo 

fluorescent and bioluminescent imaging together with X-ray capability (

Figure 1.1

).

The IVIS Lumina XRMS Series III Imaging System includes:

A scientific grade, thermoelectrically-cooled CCD camera mounted on a light-tight imaging 
chamber with integrated optical modules.

A module for X-ray imaging with a two-position scintillation plate that accommodates subjects up 
to 2.8 cm vertical height or larger subjects up to 5.3 cm vertical height.

Fluorescence equipment: 

22-position excitation filter wheel with 19 equally spaced excitation filters covering the 
wavelength range from 410 to 790 nm 

8-position filter wheel with 7 emission filters spanning the wavelength range from 500 – 865 nm

Living Image

®

 Software for automated image acquisition, post-processing, and data analysis. 

A Windows

®

-based computer system for data acquisition and analysis.

This manual explains how to operate and maintain the equipment, and provides guidelines for 
obtaining optimal bioluminescent, fluorescent, and X-ray images. Before using the IVIS Lumina 
XRMS Series III, please read this manual carefully to obtain safe, optimum performance and a 
maximum service life from the unit. For instructions on using the Living Image software, please see 
the Living Image

®

 Software User Manual for IVIS Lumina XRMS Series III (PN CLS137702RevB).

If you have questions regarding this manual or the IVIS Lumina XRMS Series III, please contact 
PerkinElmer Technical Support (see 

page 24

). 

Figure 1.1  

IVIS Lumina XRMS Series III 

Summary of Contents for IVIS Lumina III Series




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands