Paul Agnew Aerion Series, Installation, Operating And Maintenance Manual

Page: 102 / 104

CLEANING THE CERAMICS
97.
Remove the ceramics in reverse order as detailed in the layout diagram/s.
Gently clean the ceramics in the open air, using a soft brush and a vacuum cleaner. Where necessary
replace damaged components only with genuine Living Fire specified parts. Seal any scrap ceramics in
plastic bags and dispose at proper refuse sites. When using a vacuum cleaner, it is recommended that
one with a HEPA filtering system is used.
Re-fit the Fire bed arrangement, re-seal the appliance and check the safe operation of the appliance.
For customer/technical service contact;
Living Fire (distributors of PAD Heaters)
361 Swan Street
Richmond, Victoria 3121
Office: (03) 99 777 888
Aerion Range